Instructions / Assembly

5
Let’s get this thing fired up! Or
should we say, lit!
Thread horizontal support tubes
onto the main Fixture (1).
Step 1
Pre-Installation
• Read all instructions prior to beginning assembly.
• To avoid damaging this product, assemble it on a soft, non-abrasive surface
such as carpet or cardboard.
• Keep the receipt and these instructions for proof of purchase.
• Use 3 Type A19 Bulbs (not included).
• Max. Wattage: 60W per bulb (180W total).
• 120V 60Hz AC Only.
1
Remove hardware components
from the back of the horizontal
support tubes.
Step 2
1