Instructions / Assembly

3
Safety first, fun later
DO NOT use for commercial purposes
DO NOT leave spilled liquid on fixture
DO NOT use light fixture if damaged
DO NOT make temporary repairs
DO NOT use outdoors
Proper use
Safe use of this product
starts with you.
Use this light fixture responsibly with the
primary concern for your safety. Follow
assembly instructions carefully and inspect
product upon receipt and each use.
Nathan James and its parent companies cannot
be held legally responsible for any injuries
or death resulted from failure to follow
instructions or improper use of this product.
Do not modify the structure
of this product in any way.
Our products have been tested to meet specific
safety measures as they were originally intended
to be sold. Any modifications will present the risk
of creating significant safety issues which Nathan
James will not be responsible for.
WARNING: RISK OF
ELECTRIC SHOCK
Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may
have occurred during shipping. If there
is a defect in the wire, do not attempt
installation. Please reach out to our
Customer Happiness team at
[e-mail] or 1-866-619-1004
Before starting the installation, disconnect
the power by turning o the circuit breaker or
by removing the appropriate fuse at the fuse
box. Turning the power o at the switch is NOT
SUFFICIENT to prevent electrical shock.
PLEASE CONSULT A QUALIFIED ELECTRICIAN IF
YOU HAVE ANY ELECTRICAL QUESTIONS.
WARNING