Let’s build the Frank Vanity Light 0 M I N UT 20 SEMBL Y A S E 2 SKU 12502 Scan me! Inspiration Digital Instructions Free Lifetime Warranty 22-0729
Ok, let’s get rolling This should be easy, just follow our instructions and you will be back to Netflix in no time.
Safety first, fun later Safe use of this product starts with you. Do not modify the structure of this product in any way. Use this light fixture responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use. Our products have been tested to meet specific safety measures as they were originally intended to be sold.
The goods 1 A 2 B C 3 D IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
Pre-Installation • Read all instructions prior to beginning assembly. • To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. • Keep the receipt and these instructions for proof of purchase. • Use 2 type G50 bulbs up to 60 watts or CFL or LED equivalent (not included). Step 1 Okay, time to get started! Don’t worry, we made the first step extra easy. Thread the middle post section into the back of the Fixture (1) and remove the Socket Rings (2).
Step 2 Secure the back plate of the Fixture (1) to the middle post section using the provided hardware. Tighten with the Wrench (D). 1 D Step 3 You’re doing great! Are you a professional or something? Now it’s time to attach the Shades (3) to the Fixture (1) using the Socket Rings (2).
Step 4 You’re almost halfway done! Time for a snack break… Okay, back to work. Now it’s time to make sure your fixture will be nice and level when it’s installed. To do this, turn the round plate on the back of the Fixture (1) to ensure the holes in the round plate are horizontal/level. You can place the Fixture on a table top to help with this step. Once the holes in the plate are horizontal, secure the nut on the back of the round plate using the Wrench (D).
Step 5 E Remove the Finial Nuts (E) from the Cross Bar (C). C E Step 6 Okay, now for the fun part. Install the Cross Bar (C) to your pre-installed electrical box using the Junction Box Screws (A). Tighten using a Phillips head screwdriver. C A Note: Be sure that you are only making the connections to a 120V AC 60Hz circuit. If you do not have a pre-existing electrical box, we strongly advise using a certified electrician.
Step 7 Now wrap the ground wire around the grounding screw on the Cross Bar (C). Secure by tightening the screw using a Phillips head screwdriver. electrical box C ground wire Step 8 Join the matching colored wires (white to white, black to black, and ground to ground) with Wire Connectors (B). Tuck the excess wire into the electrical box.
Step 9 E Now it’s time to secure the Fixture (1) to the Cross Bar (C) on your pre-installed electrical box using the Decorative Nuts (E). Be sure that you have all of the excess wire tucked into the electrical box. E To properly fasten the Decorative Nuts (E), thread in or out to adjust for proper threading length. Step 10 Now for the final touch: install the light bulbs! We recommend 2 type G50 bulbs.
Questions? Don’t worry, we’ve got the answers What other light bulbs can fit in this light? Is this light compatible outside North America? The bulb must not be greater than the max wattage for the fixture. It must match the base size, and the diameter of any area of the bulb should be less than diameter of any area of shade, so that it can fit. Our lighting is only warranted in Canada and the United States.
No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle. Our way Their way Give us a call Re-package item Replacement Schedule pick up You Track package Replacement You We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
We are only in business if you’re happy For starters, thanks for being you. Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help We do our best to ensure your light fixture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free. Warranty This product comes with a lifetime warranty from the date of purchase.
