Use and Care Manual

15
Install the light bulbs into place. And that’s it, time to enjoy your new light!
Now would also be a good time for a celebratory pizza (or two, we’re not judging).
Use 2 A16 LED 60 Watt Equivalent
(not included).
120V 60Hz AC only.
Step 13
Problem
The bulb will not light.
The fuse blows or circuit
breaker blows when the light
is turned on.
Possible Causes
The bulb is burned out.
The power is o.
The circuit breaker is o.
There is an exposed wire.
Solutions
Replace the light bulb.
Ensure the power supply is on.
Ensure the circuit breaker is in the ON position.
Discontinue use of the light.
Contact a qualified electrician or reach out to
our Customer Happiness team at
[e-mail] or 1-866-619-1004.
Troubleshooting