Instructions / Assembly

10
Secure the Shade (2) to
the Fixture (1) using the
Decorative Screws (3).
Step 8
Problem
The bulb will not light.
The fuse blows or circuit
breaker blows when the light
is turned on.
Possible Causes
The bulb is burned out.
The power is o.
The circuit breaker is o.
There is an exposed wire.
Solutions
Replace the light bulb.
Ensure the power supply is on.
Ensure the circuit breaker is in the ON position.
Discontinue use of the light.
Contact a qualified electrician or reach out to
our Customer Happiness team at
[e-mail] or 1-866-619-1004.
Troubleshooting
1
3
2
Tip from a friend to a
friend: First secure the three
decorative screws 75% and
once they’re in place, tighten
100%.