INSTALLATION NSTRUCTIONS FLOOD LIGHT SECURITY CAMERA For more support, please email us at elint-se@outlook.com Your questions will be answered promptly.
PARTS INCLUDED: Note: Only use this part when installing with Exterior Electrical junction boxes 2pcs Quick Connectors 1pc Safety Wire 1pc Mounting Cross Bar 2pcs External J-box Screws. 8X32 size 1pc Metal bracket adapter 2X external J-box screws. 3/16 size 1pc Flood Ligth Camera Note : These instructions assume you are replacing an existing floodlight and/or have a junction box where Floodlight Cam can be mounted.
HOW EVERYTHING GOES TOGETHER: Installation Option #1: Flush-mount Junction Box ` Head Lights Quick Connector Hot Wire Camera Lens Deco nuts & rubber washers LED Indicator Light Microphone PIR Sensor FCAM3000SMART Neutral Wire Safety Wire & hook Mounting Screws Mounting Cross Bar
Installation Option #2: Exterior Junction Box Installation Head Lights Quick Connector Exterior J-box (NOT INCLUDED) Black/Hot White/Neutral Wire Wire Mounting Screws Camera Lens LED Indicator Light Deco nuts & rubber washers Safety Wire & hook Microphone PIR Sensor FCAM3000SMART Mounting Cross Bar Metal bracket (For External J-box Only)
MOTION SENSOR AND CAMERA POSITION For best performance, the Motion Sensor should be located parallel to the ground. The motion sensor is optimized to detect a human-like object up to 32fts at the height of 9ft above height. PARALLEL TO GROUND 9ft 32ft BEFORE INSTALLING Floodlight Cam ships with the camera upside down on the fixture. Ensure to rotate the camera head so that the PIR sensor is parallel to the ground. Bring the PIR sensor down 90°.
FLUSH MOUNT JUNTION-BOX INSTRUCTION 1. INSTALLING THE CROSS-BAR BRACKET • Install mounting cross bracket to the junction box using J-box mounting screws. 2. HANG THE FLOODLIGHT FOR EASY CONNECTION • Use the provided safety wire and hook to hang the Floodlight Camera from the mounting cross bracket.
3. CONNECT THE POWER LINES. • Connect the Hot/line wire from the junction box to the black wire from the floodlight camera using the provided connector. Open the clamping unit from the connector and close it once the wire is fully inserted. • Connect the Neutral wire from the junction box to the white from the floodlight camera using the provided connector. Open the clamping unit from the connector and close it once the wire is fully inserted.
EXTERNAL JUNCTION-BOX INSTALLATION Note: for this installation method you need the round metal Bracket and 3/16 screws 1. INSTALLING MOUNTING CROSSBAR AND METAL BRACKET ADAPTER: • Using the exterior J-box mounting screws, 3/16 x 0.5in (shorter screw) , install mounting crossbar and metal bracket adapter to the junction. 2. HANG FLOODLIGHT FOR EASY CONNECTION • Use the provided safety wire and clip to hang the Floodlight Camera from the mounting cross bracket.
3. CONNECT THE POWER LINES. • Connect the Hot/line wire from the junction box to the black wire from the floodlight camera using the provided connector. Open the clamping unit from the connector and close it once the wire is fully inserted. • Connect the Neutral wire from the junction box to the white from the floodlight camera using the provided connector. Open the clamping unit from the connector and close it once the wire is fully inserted.
Warnings: 1. This product may represent a possible shock or fire hazard if improperly installed. 2. The product should be installed following the owner’s manual, electrical codes, and/or the current National Electric Code (NEC). 3. Use only UL or IEC approved wire for input/output connections. 4. Use only on 120-volt 60Hz circuits. 5. Do not use with dimmers. 6. RISK OF SHOCK: ensure always remember to turn Off the Power from the electrical panel box before you install the fixture. 7.
