Spec Sheet
Royne Industries LLC dba NASCOM
|
P: 800.843.5530
|
F: 800.727.4041
|
www.nascominc.com
4
DWG No. 1200405-05 Rev. 2
PRODUCT TYPE (1 or 2 digits):
• ST = SWITCH/MAGNET SET
• SW = SWITCH ONLY
• M = MAGNET ONLY
N505AUTMC
BUILT-IN END OF LINE RESISTOR VALUE (zero to 4
digits):
• Blank = No built-in end of line resistor
• All other resistor values are specied (e.g. 1K
= 1,000 Ω)
LEAD WIRE COLOR (zero to 2 digits):
• Blank = Switch Color except:
» resistor contacts standard is red wire
» all 2 conductor jacketed wire is grey
• BL = Blue leads
• OL = Orange leads
WIRE TYPE (0 or 1 digit):
• Blank = UL1061 | 22AWG | 7/30
• J = 2-conductor PVC Jacketed NEC Type
CL2 and CM
CIRCUIT (0, 2 or 3 digits):
• Blank = CLOSED LOOP
• 2CR = DUAL CLOSED LOOP
• FB = OPEN LOOP
• SD = SPDT
• DD = DPDT
LEAD LENGTH (zero, 3 or 4 digits):
• Blank - 24 Inches
• All other lengths specied in
Inches with 3 digits (e.g. 036 =
36 Inches)
* lead length is armored cable length-
wire length is 12 inches greater
than armored cable length
END OF LINE RESISTOR (zero to 4 digits):
• Blank = Resistor in series with the switch
• P = Resistor in parallel with the switch
• SP = Resistor 1 in series to the switch; resistor
2 in parallel to the switch
XX XXX/ XXXX X XX XXXX XXXX
N505AUTMC
3” TRACK MOUNT FLIP SWITCH WITH UNIVERSAL MAGNET