User's Manual

IV. Audio Muting
When audio source is cut off for 3 minutes, the speaker will
be muted. But if audio signal resumes, the muting will be
disabled and speaker will be ON again.
V. Active/Passive Speakers
The 2.4GHz system can support infinite no. of
receivers(speakers or headphones). However, the no of
receivers increase, the performance will be downgraded,
i.e. transmission range will be reduced.
The first two receivers paired with the transmitter are called
“Active” speaker. The receivers paired later than the
Active Speakers are called “Passive Speaker”. For multi-
speakers system, the Active Speakers can maintain its
performance and is independent with the no. of receivers in
the system.
If one Active Speaker is powered off, the other Passive
Speakers cannot be jumped into Active Mode
automatically. It has to be powered off first and then power
up again to make it “Active”.
REV0B Page 9 of 11
July 02, 2005