User's Manual

III. Powering the Speakers
Insert the small, round plug from one speaker
AC power adaptor into the speaker power
input jack
Plug the other end of the speaker AC power
adaptor into any standard 120V AC wall
outlet.
Note: Be sure to use the speaker AC power
adaptors rated 15V DC 800mA
1. After powering up the speaker, the
power/RSSI indicator will start blinking in
green color and searching for transmitter.
2. If transmitter is found and connected, the
power/RSSI indicator will turn green.
3. For stereo operation, set the left/mono/right
switch to “left” on the speaker located to
the left of the listener, and set the other
speaker to “right” position. Set each
speaker to “mono” for mono operation.
REV0B Page 8 of 11
July 02, 2005