manual
18
EN
www.napoleongrills.com
N415-0425 MAY 31.18
Problem Possible Causes Soluon
the burner abruptly
sound, followed by a
type sound and grows
clogged.
Burner overheated due to inadequate
Leaking gasket surrounding the ceramic
housing.
two minutes. Relight burner and burn on high
surface is covered by objects or accessories.
two minutes, then relight.
Allow burner to cool and inspect very closely
your authorized Napoleon dealer to order a
replacement burner assembly.
Contact your authorized Napoleon dealer for
assembly.
working.
Unit not connected to power.
Blown Fuse.
Faulty transformer.
Terminals on switch or circuit board are
corroded or loose.
Faulty igniter.
Dirty or corroded electrodes.
Replace fuse located on outlet line of
transformer.
Replace if required.
Clean or replace as required.
Oven and control panel
lights not working
Unit not connected to power.
Blown fuse.
Faulty transformer.
Terminals on switch or circuit board are
corroded or loose.
Replace fuse located on outlet line of
transformer.
Replace if required.