Use and Care Guide

The remote control has a removable plastic tab to prolong the battery life while shipping. Remove the tab for the

remote control to function.

note:

W415-2172 / B / 08.10.18

6.0 maintenance

6.1 remote battery installation

1. To replace the existing battery, remove the battery

holder.

2. To remove the battery holder, turn remote onto

front side and press the left side lever towards the

center while pulling the battery holder out using

the slot provided.

3. Replace existing battery, type CR 2025, with a

new battery and reinstall the battery holder into

the remote by sliding it into position.

4. Battery cover is secure onto the remote control

when a "CLICKING" noise is heard.

REMOTE

(REAR SIDE)

BATTERY HOLDER

BATTERY (CR 2025)

• In preparation for maintenance, always disconnect the power and allow the electric appliance to cool before

performing any cleaning, maintenance, or relocation of this electric appliance. Turn controls to off and remove

plug from outlet or turn off the house circuit breaker to electric appliance receptable.

• Do not install replacement lamps that exceed speciﬁed maximum watts.

• The LED lights in your appliance can become hot. Allow at least 10 minutes between turning off the appliance

and removing the lights to avoid accidental burns.

• Do not handle the lights with care ﬁngers, as oils from your skin will damage the lights when they heat up. Use

gloves or a clean dry cloth when handling lights.

WARNING