Installation Guide
W415-1698 / 12.20.16
27
EN
HEATER, BLOWER, AND HIGH LIMIT SWITCH ASSEMBLY
HOLDING BRACKETS
6.6 HEATER, BLOWER, AND HIGH LIMIT SWITCH ASSEMBLY REPLACEMENT
1. Remove the screws from the holding brackets on each side of the blower.
2. Remove heater, blower, and high limit switch assembly from the appliance.
3. Unplug the wire connectors connected to the assembly.
4. Install the new heater, blower, and high limit switch assembly and secure by fastening the assembly to
the holding brackets.