Installation and User Guide

NOTE: The appliance tabs come bent. Tabs must be bent ﬂat by hand when fully recessing the

appliance into the wall (FIG. 4).

A. Remove the mesh trim front. Refer to "MESH TRIM FRONT REMOVAL " section.

B. Install the rubber feet onto the bottom of the appliance for stability. Refer to "RUBBER FEET

INSTALLATION" section.

C. Install the top and bottom brackets provided.

D. Insert the appliance into the mantel and secure it with the brackets, or refer to "ELECTRIC

APPLIANCE MANTEL" installation manual for proper appliance installation instructions.

E. Place the crystal embers along the media tray. Refer to "CRYSTAL EMBER INSTALLATION" section.

F. Reinstall the mesh trim front.

3.6 INSTALLING THE APPLIANCE INTO A MANTEL

FIG. 3

FIG. 4

W415-2172 / A / 11.10.17