Installation and User Guide

W415-2172 / A / 11.10.17

3.4 INSTALLING THE APPLIANCE ONTO THE WALL

Due to the many different materials used on different walls, it is highly recommended to consult your local

builder before installing this appliance on the wall.

A. Select a location that is not prone to moisture and is located at least 36" (91.4cm) away from

combustible materials such as curtain drapes, furniture, bedding, paper, etc.

B. Have 2 people hold the appliance against the wall to determine the ﬁnal location.

C. Place unit face down on a soft, non abrasive surface. Remove the bracket from the back of the unit

by removing the screws (see illustrations below).

D. Mark out location, then mount the bracket(s) onto the wall using the supplied screws. This bracket

MUST have the hooks facing upward and be level. NOTE: It is strongly recommended that the

mounting bracket be screwed into the wall studs where possible. If the wall studs cannot be

used, ensure that the supplied plastic anchors are used to afﬁx the bracket to the wall and

the bracket is adequately

secured.

E. With the wall mounting bracket

installed, have 2 people lift the

appliance up and insert the

2 hooks on the bracket into

the 2 slots on the back of the

appliance.

F. Check the appliance for stability ensuring that the bracket will not pull free from the wall.

HOOK

SCREWS

HOOK

NEFL42/50FH-MT BRACKET ILLUSTRATED

NEFL60FH-MT BRACKET ILLUSTRATED