SDS

_____________________________________________________________________________________________
1047375 - MITSUBISHI Li-Mn Button Cell CR2025
Revision Date 13-Jun-2011
7. HANDLING AND STORAGE
Handling
In case of rupture. Handle in accordance with good industrial hygiene and safety practice.
Avoid contact with skin, eyes or clothing.
Storage
Keep container tightly closed in a dry and well-ventilated place. Keep out of the reach of
children.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions
ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area).
Do not touch or walk through spilled material. Stop leak if you can do it without risk. DO
NOT CLEAN-UP OR DISPOSE OF, EXCEPT UNDER SUPERVISION OF A SPECIALIST.
Environmental Precautions
Use water spray to reduce vapors or divert vapor cloud drift. Avoid allowing water runoff to
contact spilled material.
_____________________________________________________________________________________________
Methods for Containment
Cover with DRY earth, DRY sand or other non-combustible material followed with plastic
sheet to minimize spreading or contact with rain. Dike for later disposal; do not apply water
unless directed to do so. Cover powder spill with plastic sheet or tarp to minimize spreading
and keep powder dry.
Methods for cleaning up
Page 3 / 8
Use personal protective equipment as required. Cover powder spill with plastic sheet or tarp
to minimize spreading and keep powder dry. Take up mechanically, placing in appropriate
containers for disposal. Avoid generation of dust. Clean contaminated surface thoroughly.
Other Information
DO NOT GET WATER on spilled substance or inside containers.