Manual

10
www.napoleongrills.com
EN
EXAMPLE 1: 605 BUILT-IN ISLAND AGAINST NON-COMBUSTIBLE WALL
The above example is shown built against a non-combusble house wall. Below, the dashed line represents the perimeter
of the countertop (not supplied). It has the IM-WSF kit in 2 places which stands the unit of from the wall the required 4”
(102 mm) to create clearance for opening the lid of the grill. The WSF (wall spacer kit) does not provide enough oset to
allow the unit to be placed against a combusble wall. The clearance marked on the rang plate of the grill sll needs to
be maintained. The kit extends from the countertop to the pao or deck surface, blocking o the area behind the island,
prevenng debris from entering behind the cabinet. Also shown is the IM-CEP, end panel, which creates a nished look to
the ends of the assembled cabinets by covering the exposed knockouts and mounng holes.
*Other grill heads can also be substuted. Ensure the under grill cabinet corresponds to the unit.
MODULE DESCRIPTION QTY SUBSTITUTE DESCRIPTION QTY
IM-UGC605 UNDER UNIT CABINET 605 1
BIM605RB-N MIRAGE 605 BUILTIN NATURAL 1 BIM605RB-P MIRAGE 605 BUILTIN PROPANE 1
IM-UDC SINGLE DOOR CABINET 1 IM-UTC PROPANE TANK CABINET 1
IM-3DC THREE DRAWER CABINET 1
IM-CEP CABINET END PANEL 2
WALL OF HOUSE
IM-WSF
IM-WSF
IM-3DC
IM-UDC
IM-CEP
IM-CEP
IM-UGC605
GRILL NOT INCLUDED
*
*
MODULE DESCRIPTION QTY SUBSTITUTE DESCRIPTION QTY
IM-UGC605 UNDER UNIT CABINET 605 1
BIM605RB-N MIRAGE 605 BUILTIN NATURAL 1 BIM605RB-P MIRAGE 605 BUILTIN PROPANE 1
IM-UDC SINGLE DOOR CABINET 1 IM-UTC PROPANE TANK CABINET 1
IM-2DC TWO DRAWER CABINET 1
IM-45T 45 DEGREE PANEL KIT 2
IM-CEP CABINET END PANEL 2