Installation Sheet

W415-1328 / A / 01.05.16

GLASS

GASKET

DOOR

FRAME

GLASS

RETAINER

A. Insert 4 AA batteries (not supplied) into the battery housing supplied, note the polarity of the batteries

and insert as indicated on the cover (+/-). (To open the battery housing slide the back piece upwards

and off of the battery housing).

B. Attach the wires from the wiring harness of the appliance to the battery housing.

C. Place the battery housing into the valve compartment below the burner, ensure that the battery

housing is placed in a clean and easily accessible location.

D. Turn the gas and electrical power back on to begin operating the appliance.

WARNING

ENSURE THE GAS AND ELECTRICAL POWER IS TURNED OFF TO THE APPLIANCE.

APPLIANCE MAY BE HOT, DO NOT SERVICE UNTIL THE APPLIANCE HAS COOLED.

6.4 BATTERY HOUSING INSTALLATION

6.5 GLASS / DOOR REPLACEMENT