Owner's Manual
www.napoleongrills.com
17
EN
High Elevaon Installaon
This listed gas appliance is tested and approved for elevaons from 0 to 4500 feet in Canada and the U.S.
When installing this appliance at an elevaon above 4500 feet (in the U.S.), it may be necessary to
decrease the input rang by changing the exisng burner orice to a smaller size. Input should be reduced
four percent (4%) for each 1,000 feet beyond the 4,500 feet above sea level, unless the heang value of
the gas has been reduced, in which case this general rule will not apply. To idenfy the proper orice size,
check with the local gas ulity.
When installing this unit at an elevaon above 4,500 feet (in Canada), check with local authories.
Consult your local gas ulity for assistance in determining the proper orice for your locaon.
NORMAL
ABNORMAL
CleaningTheOuterApplianceSurface: Do not use abrasive cleaners or steel wool on any painted, or
stainless steel parts of your Napoleon Appliance. Doing so will scratch the nish. Exterior surfaces should
be cleaned with warm soapy water. To clean stainless surfaces, use a stainless steel or a non-abrasive
cleaner. Always wipe in the direcon of the grain. Over me, stainless steel parts discolor when heated,
usually to a golden or brown hue. This discoloraon is normal and does not aect the performance of the
appliance
WARNING!Theapplianceareamustbeclearandfreefromcombusblematerials,gasolineand
otherammablevaporsandliquids.Donotobstructtheowofcombusonandvenlaonair.Keep
thevenlaonopeningofthecylinderenclosurefreeandclearofdebris.