Installation and Operating Instructions

14
W415-0806 / C / 09.13.11
Tear the embers into pieces and place along the front row of ports covering all of the burner area in front of
the small logs. Care should be taken to shred the embers into thin, small irregular pieces as only the exposed
edges of the bre hairs will glow. The ember material will only glow when exposed to direct ame; how-
ever, care should be taken to not block the burner ports.
Blocked burner ports can cause an incorrect ame pattern, carbon deposits and delayed ignition. PHAZER
TM
logs glow when exposed to direct ame. Use only certi ed "glowing embers" and PHAZER
TM
logs available
from your authorized dealer / distributor.
32.1
Randomly place the charcoal embers along the
f
ront and sides o
f
the log support tray in a realistic manner.
Fine dust found in the bottom of the bag should not be used.
NOTE: Charcoal embers are not to be placed on the burner.
97.1
Remove the backing o
f
the logo supplied and place on the glass viewing door,
as indicated.
½"
½"
LOGO
4.5 OPTIONAL CHARCOAL EMBERS
4.6 GLOWING EMBERS
4.7 LOGO PLACEMENT