MSDS

5
batteries per
package
Maximum net
quantity (mass)
per package
2.5 Kg
N/A
N/A
Equivalent lithium content (g) is calculated as 0.3 (g/Ah) times the rated capacity (Ah) .
2) Each cell or battery is of the type proven to meet the requirements of each test in the UN Manual of Tests and
Criteria, Part III, section 38.3 Cells
3) Section II of Packing Instruction PI 968:
a) Be marked to indicate that it contains lithium metal cells & batteries, and that special procedures be followed in
the event that the package is damaged.
b) Each package must be labeled with a lithium battery handling label.
c) Be accompanied by a shipping paper explaining that the cells and batteries are excepted from regulations.
d) Packaging requirement following to above 1) Lithium weight or equivalent lithium content must be less than
value in table.
e) Be capable of withstanding a 1.2m drop test in any orientation without shifting of the contents that would allow
short-circuiting, and without release of package contents.
Because the consignor has to take the responsibility, the customer has to confirm the exception conditions when
shipping.
Section 15-Regulatory Information
EC Labeling : None
Risk Phrases :None
Safety Phrases : None
Labeling is not required because batteries are classified as “articles” under the Dangerous Preparations
Directive and as such are exempt from the requirements of the Directive.
Section 16-Other Information
Note:
(1)The symbol in above-mentioned materials " ——"representative consult at present it materials not
relevant, but symbol "NA" represent field the getting more suitable for material.
(2)If you want further information, please contact JHIH HONG sales representative.
6F, NO.15, WU CHU
AN RD., WU-KU INDUSTRIAL PARK,
NEW TAIPEI CITY, TAIWAN
Tel:[phone] Fax:[phone]
E-mail: [e-mail] http://www.jht-energy.com
Last data revised 2014.01.01