Installation Instructions
8
www.napoleongrills.com
N080-0213
N715-0082
N570-0086
N010-0570
W445-0031
N010-0281
N080-0213
N570-0086
This grill is designed for masonry, enclosures only, and must be installed and serviced by a
qualied installer to local codes.
1. Aach side mounng brackets to each side of the grill using #14 x 1/2" screws (N570-0026).
2. Lay the rear trim piece across the back of the opening. To keep it in place, a dab of silicone may be applied
to each wing of the rear trim.
3. Lower the unit in place, the wings on the rear trim should be under the side mounng brackets. Connect the
ex supply line to the ng at the end of the manifold.
4.The enre installaon must be leak tested before operang the unit.