Installation Instructions
7
www.napoleongrills.com
This grill is designed for masonry, enclosures only, and must be installed and serviced
by a qualied installer to local codes.
1. Aach side mounng brackets to each side of the grill using #14 x 1/2” screws (N570-0086).
2. Lay the rear trim piece across the back of the opening. To keep it in place, a dab of silicone may be ap-
plied to each wing of the rear trim.
3. Lower the unit in place, the wings on the rear trim should be under the side mounng brackets. Connect
the ex supply line to the ng at the end of the manifold.
4.The enre installaon must be leak tested before operang the unit.
N080-0213
N080-0213
N570-0086
N715-0081
N570-0086
W445-0031
N010-0281
N010-0569