User Manual

19
www.napoleon.com
N415-0562-AU JUN 17.20
BUILT-IN UNIT OPENING DIMENSIONS
MODEL OPENING DIMENSIONS NOTES
W D 
 
756mm



225mm


BURNER



419mm

114mm

2


34” (864mm)
RECOMMENDED
MINIMUM 10 SQ IN (65cm
2

OF VENTILATION REQUIRED ON
EACH END OF CABINET
W
H
D
6” (152mm)
GAS INLET OPENING
OUTDOOR GFI ELECTRICAL OUTLET
REC OMMENDED - LOCATE ON SAME SIDE
OF GRILL AS ROTISSERIE BRACKET.
W
H
D
1¾”
(44mm)
1¾”
(44mm)
BUILT-IN SIDEBURNER
GAS INLET OPENING
NON-COMBUSTIBLE MATERIAL
Note: Accessory frames
overlap opening by 1 ¾”
(4cm) on all 4 sides.
WARNING! CABINET FRAME, CABINET AND COUNTER TOP MUST BE MADE
FROM NON-COMBUSTIBLE MATERIAL.
!
WARNING! A propane tank can not be
stored below the gas grill.
!
!
!
4” (101 mm)
ELECTRICAL CUTOUT
WARNING! This grill is designed for installaon in a built-in enclosure constructed of combusble
materials when installed with zero clearance liner Part No. BI-3323-ZCL and must be installed and ser-
viced by a qualied installer to local codes.
WARNING! WARNING! If not installing with the Zero Clearance Liner, use only non-combusble
materials (cered to ASTM E-136) when nishing the appliance (e.g. steel studs, cement board, ce-
ramic le, marble, paint, etcetera). Do not use wood or drywall.