Installation Guide

W415-1696 / 10.12.16

A. Disconnect the control panel remote receiver and decorative LED, quick connect plugs from the

printed control board (PCB).

B. Place one hand on the top rear panel and remove the 4 screws. Repeat the same process to

remove the 5 screws for the top front panel.

C. Unscrew the 3 middle screws holding the control panel bracket on the front edge of the appliance,

remove the control panel bracket from the appliance (Figure 2).

D. Remove the 2 screws holding the control panel to the bracket.

E. Replace the new control panel, plug control panel, remote receiver and decorative LED to the

control board.

5.11 CONTROL PANEL REPLACEMENT

FIG. 1

CONTROL PANEL

FIG. 2

PANELS

PCB

CONTROL PANEL

LED CONNECTOR

DECORATIVE LED

LIGHT

INSTRUCTIONAL VIDEO:

HOW TO REPLACE CONTROL PANEL