Manualshelf

Installation Guide

ManualsBrandsNAPOLEON ManualsElectric Fireplace Inserts40 in. Built-In Electric Fireplace Insert
21222324252627282930
W415-1696 / 10.12.16
30
EN
A. To gain access to the fuse on the PCB refer to sections 5.0 - 5.4.
B. Remove the plastic cover from the fuse.
C. Pull the fuse (2Amp) out from the control board.
D. Install the replacement fuse and plastic cover.
A. Turn over the remote with rear side facing up. Slide the battery cover off the remote.
B. Remove old battery and replace the type CR 2032 battery into the remote and reinstall
the battery cover by sliding it into position, as shown. NOTE: For ease of installation,
hold the batter while sliding the cover onto the remote.
C. Battery cover is secure onto the remote control when a "CLICKING" noise is heard.
FUSE COVER
REMOTE
(REAR SIDE)
BATTERY (CR 2032)
BATTERY COVER
5.9 FUSE REPLACEMENT
5.10 REMOTE BATTERY REPLACEMENT