Installation Guide

W415-1696 / 10.12.16
27
EN
A. Place a hand on the glass to hold it in place while removing the 10 screws on the bottom of the
glass. The glass will fall down to 2 holding tabs.
B. Tilt the glass forward on the bottom with both hands, lift the glass up and out of the appliance.
C. Place the glass on a soft, non-abrasive surface.
NOTE: The fl ame glass is made out of tempered glass.
5.3 FLAME GLASS REMOVAL
A. Remove the 5 screws on the bottom and 4 screws
on top of the fl ame board.
B. Lift the fl ame board out of the appliance.
5.4 FLAME BOARD REMOVAL
HOLDING TABS
LOG LED
INSTRUCTIONAL VIDEO:
HOW TO REMOVE FLAME GLASS
INSTRUCTIONAL VIDEO:
HOW TO REMOVE FLAME BOARD