Manual

20
EN
www.napoleon.com
N415-0526 SEP 25.20
Problem Possible Causes Soluon
Illuminaon and Side/Rear
burner ignion work ne
but I can’t ignite the side
or rear burner, even when
sparking noise occurs
The gap between electrodes is too big
or too small
Adjust the gap between two prongs of the side
burner electrode when the side burner does not
ignite.
Adjust the gap between the electrode and the
rear burner when the rear burner when the rear
burner foes not ignite
The knob and switch lights
blink eight mes with 0.5
seconds intervals and then
turn o.
The baeries are low Replace the baeries