Manual
13
EN
www.napoleon.com
N415-0522 SEP 25.20
Problem Possible Causes Soluon
peeling inside lid or hood.
Grease build-up on inside surfaces.
hood is porcelain, and will not peel. The
peeling is caused by hardened grease, which
Regular cleaning will prevent this. See cleaning
Lack of gas.
Supply hose is pinched.
Check gas level in propane cylinder.
Clean out venturi tube.
when the tank valve is turned on. Turn tank
on slowly to allow pressure to equalize. See
burner abruptly makes
blow-torch type sound
drippings and build-up. Ports are clogged.
Burner overheated due to inadequate
or a weld failure in the burner housing.
two minutes. Relight burner and burn on high
surface is covered by objects or accessories.
two minutes, then relight.
Allow burner to cool and inspect very closely
your authorized Napoleon dealer to order a
replacement burner assembly.
Contact your authorized Napoleon dealer for
assembly.
work
Electric power is out
The grill is not receiving electric power
box if it ran out
Ensure the grill is connected between the
when turn on the light
switch and the knob red
when turn on the gas
burners
The knob lights wire connector disconnected
from the main wire connector
Connect the knob light wire connector to the
main wire connector inside of the control
panel
Replace the light switch
Replace the wire harness of the control panel