How-To Guide

2
The iSecure ISEC-WL-KEYPAD
Wireless Battery-Powered Stand-
ard Keypad is a "smart", interac-
tive, menu-driven keypad de-
signed for your Napco iSecure
system. The keypad has a digital
LCD Window to show the status
of your system.
This booklet contains important
information about the operation of
your system with your keypad.
Read it carefully and keep it
handy for future reference. Check
the Glossary for an explanation of
terms that may be unfamiliar to
you.
You'll probably find subjects
mentioned in this booklet that do
not apply to your system. The
iSecure system and keypads have
such a wide variety of features
that few security systems, if any,
will ever need them all. Your
alarm professional has chosen
appropriate features for your
particular needs.
Regardless of how your system
has been configured, rest assured
that it has been carefully designed
and engineered to the highest
industry standards. To assure
optimum safety and security,
familiarize yourself with this
equipment. Periodically check its
condition and state of readiness
by testing it at least once a week
in both the AC/battery and battery
-only modes (ask your alarm
professional how to make these
tests).
INTRODUCTION
Test your sounding device and backup battery
1. While disarmed, press MENU.
2. Answer "no" (press MENU) until "3" (Bell Test) appears in
the Window.
3. Press "yes" (ENTER) to execute the test. The alarm will
sound for about two seconds.
 If the alarm does not sound, call for service.
 If the battery in the Go-Anywhere Smart Hub is low, a
system trouble E-02 will appear in the Window. Allow
24 hours for the battery to recharge. If the trouble
continues, call your alarm installer for service.
IMPORTANT - TEST YOUR SYSTEM WEEKLY