Technical Manual

ManualsBrandsNapco Security Technologies ManualsComputers & AccessoriesThe Hub is the central unit that forms the alarm panel. The Hub connects to a variety of wireless sensors that perform various sensor interfaces in the premises.

Napco iSecure Security System All technical manuals are available in PDF format at tech.napcosecurity.com 47

Programming: Window / Door Transmitters

1. Go to www.iSecureByNapco.com and log into your

iSecure account.

2. Click Sensor Configuration.

3. In the SENSOR CONFIGURATION screen (shown

below), program the installed transmitters as indicat-

ed (when finished, click Save).

ISEC-DW-XMITTER Window / Door Transmitter

DESCRIPTION

Type the sensor descrip-

tion you wish to appear

on the keypad display

SENSOR TYPE

Select "Door

Window".

SENSOR ID

Type in the 7

digit sensor

ID # for the

device

ENABLE REPORTING

Check to enable cen-

tral station reporting

SENSOR FUNCTION

Exit/Entry 1 & 2: Allows for exit delay (when leaving the premises) and entry delay

(when entering) before triggering an alarm. One of two separate exit/entry combina-

tions can be selected.

Interior: Use when armed " STAY" (usually at night when sleeping), and you want

the system to ignore this sensor. For example, use for an interior door that will be in

use when armed "STAY" but protected when armed "AWAY".

Instant: Allows for an immediate alarm when activated, providing instant protection

while you or someone else is in the premises.

24Hr Zone Audible: Provides protection at all times, whether or not the system is

armed, by sounding an alarm when the door or window is opened.

24Hr Zone Silent: Provides protection at all times, whether or not the system is

armed. When armed and the door or window is opened, a silent alarm will be sent to

the central station.

Audible Panic: Triggers the siren to immediately sound and an emergency report

sent to the central station.

Silent Panic: Triggers a silent report to be sent to the central station (i.e. the user

can silently signal an emergency).

SIGNAL STRENGTH

Relative intensity of

the last transmission,

on a scale of 1-10 (10

being the strongest).

Note: A reading of 3

or less indicates re-

ception may be errat-

ic; relocate the sensor

closer to the Hub.

AREA

Default = 1. See the keypad

Operating Guide for the defini-

tion of "Area".

CHIME

Check to sound a chime when

a door (or window) is opened in

an unarmed system.