User's Manual

2 NAPCO iBridgeVideo ISV2-DOME-WIFI Installation Guide
Camera Wi-Fi Enrollment Using the App
First activate the camera(s) at www.NapcoComNet.com,
then perform the steps below. The camera must be pow-
ered and its green LED must be flashing continuously. Pro-
ceed as follows:
1. Connect the smart device to the local Wi-Fi network.
2. Open the iBridgeVideo app. Type a Userna
me (full
email add
ress) and Password and tap Login.
3. Tap
"+" to add the camera.
4. Scan the QR code located on the base of the camera,
then tap OK.
If you have trouble scanning the co
de,
tap Manually
enter SN and type the serial numbe
r.
5. Tap
Ne
xt to connect the camera to a net
work.
NAPCO iBridgeVideo ISV2-DOME-WIFI Installation Guide 7
Audio Compression ........ G.711
Audio Input ..................... Omnidirectional Mic
Audio Output .................. Built-in Speaker
Bidirectional Talk ............ Supports 2-way Bi-directional talk
Network
Wi-Fi ............................... IEEE802.11b/g/n, 2.4GHz
Ethernet Port .................. 1x100 Mbps
General
Ingress Protection .......... IP67
Memory Slot ................... Micro SD SDHC 32GB
included; maximum size 256GB
Installation ...................... Surface
Material .......................... Metal + Plastic
Power Supply ................. 12VDC / 1A
Power Consumption ....... Standby<3W, Work <7W
Working Environment ..... -30°C ~ + 60°C (-22°F ~ 140°F)
Dimensions .................... 109.9 x 109.9 x 102.2mm (4.3 x
4.3 x 4 inches)
Weight ............................ 352g (0.78lb.)
Working Humidity ........... 10% ~ 95%RH
LED Status Indications
When the camera is powered and operating normally, the
green LED remains on solid. Other LED indications are:
Off ................................... Camera powered off or
reboot
(after reset) in progress
Red On ........................... Boot in progress or camera error
Green Flashing ............... Waiting for network connection
Red Flashing ................... Network connection failed
Green/Red
Alternate Flashing ........... Firmware update in progress
Green Solid ..................... Normal operation
Specifications
Video Compression ........ H.265/H.264
Image Sensor ................. 1/2.7" 2 Megapixel Progressive
CMOS
Lens ................................ 2.8mm
Field of View ................... Field of View : 114°(H), 59°(V),
135°(D)
Night Vision ..................... 30m (98ft) Distance
ISV-DOME-WIFI Parts
*SD card not included; SD card required for local
motion detection storage in the iBridge app.
3
4
2
1
5
6
7
1. Microphone
2. Camera Lens
3. LED Indicator
4. Spotlight
5. Reset Button
6. Micro SD Card Slot
7. Speaker