Door User Manual

19
FUNCTION MENU
17. Activate Program? Activates the Program Mode from Keypad No. 1. Note:
This feature is disabled while armed. (See PROGRAMMING USER CODES)
18. Activate Download? For installer's use only. If accidentally enabled, press
C to exit.
Note: This feature is disabled while armed.
19. Relay Control? (Relay Control programmed? YES NO) (GEM-P3200/9600 panels only)
Turns ON or OFF one or more programmed Relay Group. Press U to turn the
displayed group on or off; press NEXT(
P) to proceed to the next group, or
PRIOR (
Q) to scroll back to the previous group. Press C when done.
• Relay Group 01: [ ____________________________________ ]
• Relay Group 02: [ ____________________________________ ]
• Relay Group 03: [ ____________________________________ ]
• Relay Group 04: [ ____________________________________ ]
• Relay Group 05: [ ____________________________________ ]
• Relay Group 06: [ ____________________________________ ]
• Relay Group 07: [ ____________________________________ ]
• Relay Group 08: [ ____________________________________ ]
17
INTERIOR
BYPASS FIRE/TBL SYS TBL CHIME
19
INTERIOR
BYPASS FIRE/TBL SYS TBL CHIME
18
INTERIOR
BYPASS FIRE/TBL SYS TBL CHIME