User's Manual

1. New Master Code (User Number 1)

2. Add/Delete/Change User Codes 2-2000

; 1 ; [ _ _ _ _ _ _ ] ; [ _ _ _ _ _ _ ] :

(New Master Code) (Confirm New Master Code)

Users programmed with Function 2 will default to a Group

Association and a Program Level Ability as follows:

USER TYPE USER NUMBER GROUP DEFAULT

ASSOCIATION

PROGRAM

LEVEL ABILITY

Master Code 1 - 1, 2, 3, 4, Master

Installer Codes 2 & 3 none 1, 2, 3, 4

Manager Codes 4 - 6 none 1, 2, 3

Supervisor Codes 7 - 9 none 1, 2

Print Only Codes 10 - 11 none 1

Basic User Codes 12 - 50 none none

Basic User Codes Group 1 51 - 100 1 none

Basic User Codes Group 2 101 - 150 2 none

Basic User Codes Group 3 151 - 200 3 none

Basic User Codes Group 4 201 - 250 4 none

Basic User Codes 251 - 296 none none

Quick Enable User 300 Code 297 none none

Quick PC Access Code 298 none none

AL-DTM2 Code 299 none none

Service Code 300 none none

Basic User Codes 301-2000 none none

; 2 ; [ _ _ _ _ ] * ; [ _ _ _ _ _ _ ] :

(User Number)

• User Number must be between 2 and 2000.

• To delete a code/card, leave the User Code blank and wait for the rapid beeping to stop

• User Code must be 3-6 digits.

• Deleting a ProxCard also deletes the associated User Code.

• Master Code must be 6 digits-only.

• Master Code is Keypad Code Access only, Prox Cards and Keyfobs cannot be

programmed as the Master Code.

USERS

User 299 is a Non-Pass Code. This is the only code that will initiate data transfer with the AL-DTM2.

NOTE:

* To Program ProxCard, enter

: AND Present ProxCard.