User's Manual

11
ALARM LOCK SYSTEMS, INC
VERSION 9.00 org REC
08/25/00 13:11:28 Fri
Clock adjust setting +0
Cycle count hex 00000E
F39 day ct hex 00
Door # 01
Printing the Lock’s Time, Date and Day. Refer to
Printer Functions (page 22) for proper Printer-Lock
positioning.
From Program Mode enter the following command:
; 5 7 :
User Programming (Continued)
Deleting a ProxCard/User Code
Delete ProxCard Access for the ProxCard programmed for User 12.
; 2 ; 1 2 : [Beep Beep Beep Beep Beep Beep Beep Beep Beep Beep ... Beep]
DO NOT Present a CARD during the 10-second period
The sounder will beep rapidly for 10 seconds.
DO NOT Present a CARD to the lock while the sounder is still beeping.
Wait for the Sounder to stop beeping. The ProxCard and code programmed for user 12 has now been deleted.
Note: Deleting a ProxCard associated with User 12 with also delete the User Code programmed for User 12.
ProxCard Batch Enroll
Program multiple Prox Cards successively using the PDL3000 Batch Enroll Feature.
Program 50 Prox Cards for Users 100-150.
; 2 ; 1 0 0 : [Beep Beep Beep ... Beep]
User 100 (Present CARD for User 100 within 10-second period, the beeping will stop after the ProxCard has been programmed.)
User 101 (Present CARD for User 101 within 10-second period, three beeps will sound at the keypad.) [Beep Beep Beep]
User 102 (Present CARD for User 102 within 10-second period, three beeps will sound at the keypad.) [Beep Beep Beep]
•
•
•
User 150 (Present CARD for User 150 within 10-second period, three beeps will sound at the keypad.) [Beep Beep Beep]
Printer Functions (AR-IR1 PRINTER required)
08/25/00 13:06:35 Fri
USER|USER |GROUP|PROG
NUM |CODE | |LEVL
1 123456 .... 1234
12 987 .... ....
13 246 .... ....
153 7894 .... ....
1843 2457 .... ....
Printing the Lock’s User Code List. Refer to Printer
Functions (page 22) for proper Printer-Lock positioning.
From Program Mode enter the following command:
; 5 6 :
Printing the Lock’s Audit Trail. Refer to Printer
Functions (page 22) for proper Printer-Lock positioning.
From Program Mode enter the following command:
; 5 5 :
ALARM LOCK
------- AUDIT LOG -------
08/25/00 13:06:35 Fri
13:01:59 0001 PROGRAM 56
13:01:29 0001 PROGRAM 57
13:00:53 0001 ENTRY
13:00:26 0013 ENTRY
13:00:03 0012 ENTRY
12:56:27 0001 PROGRAM 2
12:56:27 0001 PROGRAM 40
12:56:04 0001 PROGRAM 39
12:55:00 NEW CLCK TIME
12:01:39 OLD CLCK TIME
-------------------------
End of Audit Log
HIHI
HIHI
Note: Batch Enroll will not program
Users 297 through 300, these are Special
Function User Codes, See Page 15 for
more information. After a Prox Card/
Keyfob for User 296 has been Batch
Enrolled the next card presented will batch
Enroll as User 301.