User's Manual
7
CONTROLS AND INDICATORS
General Information
Visual LCD Indicators
The 2WAY-UNIVKF uses a series of icons to convey the status of the system. Each time the STATUS button is pressed, or
a command is issued, the appropriate icon(s) will display for about 6 seconds. For example, if ON/OFF is pressed to arm
the system, the Armed icon will light in a few seconds to confirm that the command was successfully performed. Below is a
description of each icon indicator. Please note that the icons marked “†” are optional and may not apply to all systems.
System in Alarm / Alarm Memory
(flashing)
The system alarm is sounding
or an alarm has occurred while you were
away. Proceed with caution!
System Trouble †
The alarm system is in a
trouble condition. Consult keypad and owners
manual for the exact nature of the trouble.
System Ready
The system is
disarmed, with all zones secure.
The system is ready to arm.
Zones Faulted †
(slowly flashing)
Disarmed, zones faulted.
Stay Mode †
The system
is armed with interior zones
bypassed.
Instant Mode †
The
system is armed with
Instant protection.
Transmit
Each time a
button is pressed the
transmit ICON will light to
indicate that the KeyFob is
transmitting to the receiver.
Armed Bypassed †
(slowly flashing) the system is
armed with zones bypassed.
Armed
The system is armed.
Fire Alarm †
(flashing) The
system is in a fire alarm
condition.
2WAY-UNIVKF_WI1024J.19_I...
page 7
Friday, February 13, 2004 08:57
Composite