User's Manual

2
WI1024J 2WAY-UNIVKF Installation Instructions
NAPCO introduces the new 2WAY-UNIVKF, the security industry’s only universal bi-
directional Keyfob with LCD status display and integral mini sounder, supported by a
revolutionary 2-way receiver.
Designed to be compatible with most major control panel brands, including NAPCO's
Gemini and Magnum and others such as ADEMCO, DSC and more, this 2-Way Keyfob is
super-miniaturized for portability yet packs tremendous sales potential and consumer market
appeal.
System Status is indicated through 7 intuitive ICONS (a lock, a house, a flame, etc.) on the
LCD display, accompanied by corresponding beep sequences on its mini sounder. Providing
both easily understood visual and audible feedback, the user always knows with certainty that
the system has carried out their command.
In addition to the many standard commands it can issue the system, it can also control up to 2
groups of lighting control, such as X-10, and up to 2 separate Garage Doors.
NAPCO 2WAY-UNIVKF keyfobs are also sold in a kit with the 2-way receiver, Model
2WAY–UNIVKFKIT. Each receiver supports up to 7 keyfobs.
2WAY-UNIVKF -
The 2-Way Universal LCD Keyfob that puts the power of a keypad in your pocket.
Easy LCD ICON Indicators
Burglar Alarm
Fire Alarm
Armed - Away
Armed - Stay
Armed - Instant
Armed - Zones Bypassed
Disarmed - Zones Faulted
Disarmed - System Ready
Transmit
System Trouble
Note:
Grey ICON indicates pulsing
THE FOLLOWING STATEMENT IS REQUIRED BY THE FCC.
INSTRUCTION TO THE USER (if device contains a digital device)
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to main-
tain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment
or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifica-
tions made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment.
2WAY-UNIVKF_WI1024J.19_I...
page 2
Friday, February 13, 2004 08:57
Composite