User's Guide

Page 2 / 2
1) First connect power supply for wii console and also connect sensor bar and AV cable.
2) Install 2*AA dry batteries in remote.
3) There is a red color code pair button “SYNC” in the back of the remote, press the SYNC button, the four
LED indicators in the front of the remote will be blinking quickly (sufficient battery power is needed).
4) Press code pair button on the wii console for code pair (after synchronization, the No. 1 LED indicator in
the remote will be solid bright).
5) Adjust the position of the sensor bar (position of cursor).
6) Read U-disk or DVD using the remote (Connect a nunchuck to the remote to read games).
4. Electrical performance specifications
Working voltage 2.5～3.0V
Working current 60-130mA
Vibrating current
80-190mA
Standby current
0.6mA
Standby time
5min
Sound distance range
<6m (under the condition without any obstacle block)
Cursor distance <3m
5. Operation supply current
(Ta = 0 ℃~70℃, VBATT=3.0V±5%, VSS=0V)
Item Characterization Range
SYNC current consumption Press SYNC searching for
console
80--120mA
POWER OFF current consumption
Power OFF
500uA±100uA
POWER ON (Bluetooth connecting) current
consumption
Power ON 100mA±10mA
Low voltage 2.3V POWER OFF current
consumption
Low voltage 2.3V Power OFF
500uA±100uA
Low voltage 2.2V POWER ON (Bluetooth
connecting) current consumption
Low voltage 2.2V Power ON 135mA±20mA
Connecting with Nunchuck current consumption
Connecting with Nunchuck
100mA±10mA
Durative vibration current consumption Durative vibrating 150mA±30mA
Sound current consumption During sound output 80mA±20mA
6. Physical parameters
Dimension: 149*36.8*33mm, net weight: 80g.