Specifications
EN
14
The dust lter at the boom:
The dust lter at the boom can be pulled
out for easy cleaning.
7. Connecng the fans to the 2-channel fan controller
The fan controller is powered by a 4-pin Molex connector that is connected directly to the
power supply.
The controller has two channels (A and B), with each channel able to control up to three 3-pin
fans, therefore a total of six fans can be controlled.
The fan controller is not designed for the operaon of powerful fans. Please take this into
account in parcular when using fans from other manufacturers.
The maximum power per channel must not exceed 18 was.