Specifications

13
Addional fans in the top cover:
If you want to install more fans at the top of
the case, please remove the Nanoxia Vent-
Cover rst by unscrewing the screws on the
outside of the case.
Then hold the fan from the inside and secu-
re it to the top by fastening the screws from
the outside.
Addional fan in the side panel:
If you want to accommodate a fan in the
side panel, please remove the Nanoxia Vent-
Cover rst by unscrewing the screws on the
outside of the case.
Please place the fan on the inside of the side
panel and screw it in from the outside.
Addional fan at the case boom:
If you want to install a 120 or 140 mm fan
on the boom of the case, please note that
you need to remove the dust lter.
Pull it out just as far as you can easily reach
the screw holes.