Specifications

Op onal case fans:

Note: Addi onal case fans in the side panel and the bo om of the Deep Silence 2 should be

mounted so that cooler air is introduced into the case. If you install case fans in the moun ng

bracket, those should support the movement of air from front to back.

Case fans installed at the top of the case should exhaust air out of the case.

We recommend the use of the 120 or 140 mm Nanoxia Deep Silence fans, available separately.

These are technically and visually equivalent to the factory-installed case fans and will work in

perfect harmony with the built-in fan control of your case.

Addi onal fans in the moun ng bracket behind the HDD cage:

If you want to mount addi onal fans inside the case, for example to op mize disk ven la on,

you can use the specially developed moun ng bracket that is screwed to the hard drive cage.

Please  rst remove the screws, as shown on picture 6C.

On the back of the disk cage the frame is

only hooked - here it is su cient to loosen

the screws slightly (picture 6D).

Hold the fan from the inside to the bracket

and screw it in from the outside. Then hook

the moun ng bracket with the fans back in

the cage and a ach it with the three screws.

picture 6C

picture 6D