Specifications

5. Removing the front panel
To remove the front panel, simply hold the
cutout at the boom of the front panel and
pull it towards you with a rm tug.
If you remove the front, please note the
I / O panel cables at the top of the front.
Please be cauous here.
6. Fan assembly and cleaning of the dust lters
The air intake openings in the front and at the boom of the Deep Silence 2 are equipped with
easy to clean dust lters. We recommend that you clean them on a regular basis.
To clean the dust lter is usually sucient to vacuum these carefully with a vacuum cleaner
(low level).
To switch the fans in the front or to clean the dust lters, please remove the front panel rst.
Next, remove the four screws with which the dust lter is connected to the front and take it
out.
Please be advised that the fans are screwed to the dust lter.
The front dust lter allows the installaon of either 2 x 120 mm or 1 x 140 mm fans. Two
120mm Deep Silence fans ( approx. 1,300 rpm) are preinstalled.
11