Specifications

4. Installaon of hard drives

Install the 2.5 or 3.5 inch hard drives in the illustrated mounng frames. In order to extract the

frame, squeeze the protruding brackets and pull the slide out gently.

To install a hard drive into a bracket insert the disk so that the connectors point to the back and

aach the hard drive using the screws provided.

For the ng of 3.5 inch hard drives please use the holes in Figure 4A (marked red).

For the ng of 2.5 inch hard drives please use the holes in Figure 4B (marked red).

The hard drives slides oer a second pair of mounng holes, so it is possible to shi the posi-

on of the drives. Those are marked in blue on the picture.

To lock the drive, push the bracket with the

drive back installed back into the slot unl

the bracket is re-engaged.

gure 4A gure 4B