Specifications

Before you take out the internal adapter,

please remove the 3.5 inch steel cover as

shown on the picture.

Open the two quick release locks of the 5.25 inch bay and remove the mounng frame. Then

aach the card reader in the frame, as shown below.

Then place the frame with the card reader back into the slot and lock the quick release.

Finally, aach the included 3.5 inch adapter to the front cover over the card reader.

3.2 Ulizing the external 3.5 inch bay

If you for example desire to place a 3.5 inch card reader, you can use the internal adapter for

this purpose.