Specifications

If you want to remove the middle cage and use only the upper cage, please note that the up-

per cage (A) is not  rmly anchored to the case. It can - if the central cage (B) is not installed

- be pulled out of the holder.

If necessary, a ach one of the two modular

cages (A or B) on the designated holder on

the bo om. Please push the hard drive cage

as far in un l it is secured.

If you for example want to improve the ven la on for SLI or CrossFire systems or for the front

moun ng of a radiator, you can remove the lower hard drive cage. Simply loosen the 8 screws

holding the cage to the chassis.

Be sure to remove the front panel at  rst.

Next loosen the four screws securing the

HDD cage to the front panel.

Finally, remove the four screws at the bot-

tom of the case which allow the cage to be

removed.