Specifications
Watercooling-ready
The Nanoxia Deep Silence 5 Rev. B has been prepared for the installaon of a water cooling
system.
Therefore you can install radiators or a compact water cooling soluon under the top cover as
well as behind the front panel.
Top cover: 120/140/240/280 mm slim radiator
Before installing a water cooling system under the cover, please ensure if there is sucient
distance to the motherboard components. We recommend mounng the radiator behind the
front of the case.
Front: 120/240 mm radiator
Behind the front panel, a 120 or 240 mm radiator can be mounted. Please note that the front
HDD-cages must be removed for this - the HDD cage on the secondary mounng rail can
usually remain in the case.
For compact water cooling soluons, you should check before the installaon if the original
factory hoses between the cooler and radiator are suciently long enough in order to mount
the radiator-fan-combinaon at the front of the case.
Rubber hose guides:
Four rubber hose guides are located in the rear, so that the appropriate water cooling compo-
nents can be operated or mounted externally.
On the next pages you can nd some useful ps and explanaons for the opmal use of your
new case and for the installaon of your hardware.
05