Specifications
5. Fan assembly
Three 140 mm fans are pre-installed in your case. You can mount up to six fans in total.
We recommend the use of the 120 or 140 mm Nanoxia Deep Silence fans, available separately.
These are technically and visually equivalent to the factory-installed case fans and will work in
perfect harmony with the built-in fan control of your case.
You can, of course, connect the addional fans to the fan controller (see Chapter 6).
All air intake openings are equipped with easy to clean dust lters. We recommend that you
clean them on a regular basis.
5.1 Front Fans
To switch the fans in the front or to clean the dust lters, rst open the lower front door. Next,
open the “Easy Access Panel” by pushing slightly on the le side of the panel (picture 5A).
You can remove the fan by pushing away the retaining lugs a lile bit from the fan and then
pull the fan out (picture 5B).
The dust lters can easily be pulled out, as you can see here (picture 5C).
Please note, that the lter elements must be fully inserted to guarantee the proper operaon
of the “Easy Access Panel”.
picture 5A
picture 5B
picture 5C
11