Specifications

4. Removing the front panel

To remove the front panel, simply hold the

cut-out at the boom of the front panel and

pull it towards you with a rm tug.

Please note that the cables of the I/O-panel

are guided through the front into the chassis,

so please be careful when removing the

front.

vercally in the frame and secure them on both sides with the 2.5 inch mounng screws (long).

Then push the frame with the hard drives into the HDD cage in the posion you prefer.

If you plan to put the frame in the addional 3-bay HDD-cage, we recommend connecng the

SATA power and data cables, before pushing the mounng frame back into the cage and then

guide the cables through the appropriate cable guides in the motherboard tray.