Specifications

3.3 Ulizing the 6 x 2.5 inch mounng frame

Our newly developed 6 x 2.5 inch frame allows the space-saving mounng of up to six 2.5 inch

drives. For installaon, the mounng frame will need three 3.5 inch bays.

To mount the hard disks, please remove the mounng frame. Insert your 2.5 inch drives

If you want to remove the lower hard drive cage in order to install a water cooling radiator,

simply loosen the 8 screws holding the cage to the chassis.

First remove the front panel (see chapter 4).

Next loosen the four screws securing the HDD cage to the front panel.

Finally, remove the four screws at the boom of the case which allow the cage to be removed.