I. Introduction________________________________________________________________02 • Specifications __________________________________________________________02 • Accessories ________________________________________________________________02 • Features _______________________________________________________________03 II. Installation Instructions ________________________________________________________06 1. Installation of the motherboard ___________________________________________________06 2.
EN I. Introduction Congratulations on the purchase of your new Nanoxia Deep Silence 5 Revision B. We are confident that you will be delighted by your new PC case for many years to come. The Nanoxia Deep Silence series has already won more than 100 awards from the international trade press. The innovative design and the exceptional quality certainly delight experts and enthusiasts alike.
If you are missing any of the items listed above, please contact our customer service immediately: support@nanoxia-world.com Features: - Watercooling ready - Complete customizable soundproofing with high quality materials meeting industrial standards - 6 x 2.5 inch mounting frame - Tool-free mounting of optical drives - 2 x USB 3.0, 2 x USB 2.0 - 10 Slots for expansion cards - Max.
EN The removable Nanoxia VentCovers mask the 120/140 mm fan holes in the case top. They allow the user to choose between the least possible noise and improved case ventilation. Another design element for optimum sound insulation is the use of two sound-insulated front doors. The doors are equipped with sound-absorbing foam. Hard drives and power supply are also decoupled mounted. The whole concept of sound proofing meets the highest expectations. Ventilation System The Nanoxia Deep Silence 5 Rev.
Watercooling-ready The Nanoxia Deep Silence 5 Rev. B has been prepared for the installation of a water cooling system. Therefore you can install radiators or a compact water cooling solution under the top cover as well as behind the front panel. Top cover: 120/140/240/280 mm slim radiator Before installing a water cooling system under the cover, please ensure if there is sufficient distance to the motherboard components. We recommend mounting the radiator behind the front of the case.
EN II. Installation Instructions 1. Installation of the motherboard You can mount E-ATX, XL-ATX, ATX, M-ATX and Mini-ITX motherboards in the Deep Silence 5 Rev. B. In order to ensure an easy installation of your motherboard, we suggest the following procedure: Please consult the following charts to find your motherboard form factor. Attach the stand-offs according to your motherboard form factor.
2. Installation of external drives You can install up to four external drives. An adapter frame for mounting a 3.5 inch drive is included. 2.1 Optical drives To install the optical drives, please remove both side panels. The installation of optical drives is tool-free. Remove the 5.25 inch cover by pulling the lateral tilting lever cautiously towards you and take out the cover. Then loosen the lock on both sides by dragging the black slider backwards (1).
EN 3.1 Mounting of hard disk drives Install the 2.5 or 3.5 inch hard drives in the illustrated mounting frames. In order to extract the frame, squeeze the protruding brackets and pull the slide out gently. To install a hard drive into a bracket insert the disk so that the connectors point to the back and attach the hard drive using the screws provided For the fitting of 3.5 inch hard drives please use the holes in Figure 3A For the fitting of 2.
If you want to remove the lower hard drive cage in order to install a water cooling radiator, simply loosen the 8 screws holding the cage to the chassis. First remove the front panel (see chapter 4). Next loosen the four screws securing the HDD cage to the front panel. Finally, remove the four screws at the bottom of the case which allow the cage to be removed. 3.3 Utilizing the 6 x 2.5 inch mounting frame Our newly developed 6 x 2.5 inch frame allows the space-saving mounting of up to six 2.5 inch drives.
EN vertically in the frame and secure them on both sides with the 2.5 inch mounting screws (long). Then push the frame with the hard drives into the HDD cage in the position you prefer. If you plan to put the frame in the additional 3-bay HDD-cage, we recommend connecting the SATA power and data cables, before pushing the mounting frame back into the cage and then guide the cables through the appropriate cable guides in the motherboard tray. 4.
5. Fan assembly Three 140 mm fans are pre-installed in your case. You can mount up to six fans in total. We recommend the use of the 120 or 140 mm Nanoxia Deep Silence fans, available separately. These are technically and visually equivalent to the factory-installed case fans and will work in perfect harmony with the built-in fan control of your case. You can, of course, connect the additional fans to the fan controller (see Chapter 6). All air intake openings are equipped with easy to clean dust filters.
EN 5.2 Fans under the top cover If you want to install additional fans at the top of the case, please remove the Nanoxia VentCovers first by removing the screws on the outside of the case. Next, hold the fans from the inside and secure them to the top by fastening the screws from the outside. Case fans installed at the top of the case should exhaust air out of the case (fan rear side facing outwards). 5.3 Fan at the bottom of the case You can install a 120 or 140 mm fan on the bottom of the case.
The dust filter at the bottom can be pulled out for easy cleaning. Additional case fans on the bottom should be mounted so that cooler air is introduced into the case (fan rear side facing inwards). 6. The 2-channel fan controller The Deep Silence 5 Rev. B is equipped with a 2-channel fan control for up to six case fans. You can operate up to three fans per channel. 6.
EN 6.2 Operation of the fan control The sliders for controlling the fans controller can be found behind the upper front door. The upper slider controls channel A and the lower slider controls channel B. 7. Installing a water cooling solution In Nanoxia Deep Silence 5 Rev. B you can install radiators or compact water cooling systems both behind the front panel and under the top cover. We recommend the installation of the radiator behind the front panel. 7.
Finally, reinstall the fans. For maximum cooling performance, you can also mount additional fans on the back of the radiator. Radiator with 2 fans mounted 7.2 Installation of a slim radiator or compact water cooling solution under the top cover Under the top cover, you can install in a 240/280 mm slim radiator. To mount a radiator under the cover, please use the 120/140 mm fan mounting holes. Before the installation, please check carefully, if the distance to the motherboard components is sufficient. 8.
EN III. Support Dear customer, The PC case you purchased has undergone a very thorough quality control. Nevertheless, should there be any unexpected problems with your case we ask that you first approach the dealer where you purchased the product. They are prepared to assist you with competent and uncomplicated advice and practical support. If perhaps a few screws were missing or you might have a question that can’t be answered by this manual, please do not hesitate to contact us directly by e-mail.
© Nanoxia 2015
