Introduction Congratulations on the purchase of your new Nanoxia Deep Silence 3 midi tower. We are confident that you will be delighted by your new PC case for many years to come. Nanoxia’s Deep Silence series have been designed and developed by an experienced team of developers in Germany. The silent optimized PC cases are of the highest quality and combine the best possible functionality with the highest level of flexibility.
EN Features: - Complete soundproofing with high quality materials meeting industrial standards - Tool-free mounting of optical drives - Max. VGA length: 345 mm (up to 430 mm with the HDD cage removed) - Room for CPU coolers with a maximum height of up to 162 mm - Mounting hole for CPU cooler in the motherboard tray - Cable management with 6 rubberised holes in the motherboard tray - Nanoxia VentCover (noise insulated): 2 x top cover - 2 x USB 3.0, 1 x USB 2.
In the front and under the floor, there are removable, easy to clean dust filter. Fans: Front: Rear: 2 x 120 mm Nanoxia Deep Silence fans (max. 1,300 rpm) 1 x 120 mm Nanoxia Deep Silence fan (max. 1,300 rpm) Optional Equipment: Bottom: Top cover: 2 x 120/140 mm fans 1 x 120/140 mm fan (removal of the HDD-holder necessary) On the next pages you can find some useful tips and explanations for the optimal use of your new case and for the installation of your hardware. Please visit our website at www.
EN Next, mount the CPU cooler - for bulky coolers, the attachment of the EPS extension after installation can be difficult. Place the motherboard carefully into the case and thread while the EPS extension through the opening provided at the top of motherboard tray. Then screw the motherboard to the motherboard standoffs. After installing the power supply, you can connect the EPS extension at the back of the motherboard tray with the EPS connector of the power supply. 2.
Open the two quick release locks of the 5.25 inch bay and remove the mounting frame. Then attach the card reader in the frame, as shown below. Then place the frame with the card reader back into the slot and lock the quick release. Finally, attach the included 3.5 inch adapter to the front cover over the card reader. 3. Installation options of HDD’s In the Deep Silence 3 you can mount up to five 3.5 inch hard drives (decoupled), as well as three 2.5 inch HDD / SSD in three HDD cages.
EN 3.2 Conversion and removal of the HDD-cage In order to enable the installation of extra-long VGA cards, the middle HDD cage of the Deep Silence 3 is modular. If you want to remove the hard drive cage to install a very long graphics card, please remove both side panels first. In order to remove the cage, you have to simultaneously pull the lever at the back facing up and press the tab on the front down.; pull the cage gently outwards.
4.1 Fans in the case front To switch the fans in the front or to clean the dust filters, please remove the front panel by holding the cutout at the bottom and pull it towards you with a firm tug. Next, remove the four screws with which the dust filter is connected to the front and take it out. Please be advised that the fans are screwed to the dust filter. The front dust filter allows the installation of either 2 x 120 mm or 1 x 140 mm fans. Two 120 mm Deep Silence fans (1.300 rpm) are preinstalled. 4.
EN Additional case fans in the side panel and on the bottom of the Deep Silence 3 should be mounted so that cooler air is introduced into the case (fan rear side facing inwards). 5. The 2-channel fan controller The Deep Silence 3 is equipped with a 2-channel fan control for up to six case fans. You can operate up to three fans per channel. 5.1 Connecting the fans to the fan control The fan controller is powered by a 4-pin Molex connector that is connected directly to the power supply.
6. The I/O-Panel The I/O panel includes connectors for external USB devices (1 x USB 2.0, 2 x USB 3.0), and the microphone and headphone ports. The blue USB connectors are super-Speed USB 3.0, the USB 2.0 port is black. The left audio connector (when viewed from the front) is for headphones, the right is intended for a microphone. The hard drive activity is indicated by flickering of the green illuminated power button.
EN 7. Support Dear customer, The PC case you purchased has undergone a very thorough quality control. Nevertheless, should there be any unexpected problems with your case we ask that you first approach the dealer where you purchased the product. They are prepared to assist you with competent and uncomplicated advice and practical support. If perhaps a few screws were missing or you might have a question that can’t be answered by this manual, please do not hesitate to contact us directly by e-mail.
